Improve the comfort, efficiency, and longevity of your home by removing hot air and moisture from your attic
By removing excess heat in your attic, you can be more comfortable in your home, reduce energy usage, and save money. Additionally, you can protect your investment by removing moisture build-up year-round.
- Remove heat and moisture
- Reduce energy usage
- Protect your home and roof
- Reduce premature aging of roof shingles
Cools your attic and reduces energy usage in the summer months
Attic temps can reach 160 degrees or more in the summer. These elevated temperatures can have devastating effects on you roof, interior comfort, and the overall health of your home.
Installing a gable-mounted Solar Powered Attic Fan will help remove the heat build-up in your attic and bring your attic’s temperature down closer to the ambient outside temperature.
The reduction in attic temperature will also benefit the homeowner by preserving and extending the life of the roofing and attic construction materials. Additionally, hot air in your attic can then heat the metal exterior of your HVAC ductwork and consequently heat the air passing through it, causing your air conditioner to work even harder.
- Reduce A/C usage by cooling your attic
- Be more comfortable in your home
- Reduce energy usage
- Reduce the initial blast of hot air coming from overheated air ducts
Removes moisture and reduces mold in the winter months
In the winter months, the building materials in your attic can absorb up to 28 gallons of moisture, contributing to mold and mildew growth. Moisture migrates into the attic space from daily activities such as running the dishwasher, showers and cooking. Additionally, warm attic air meeting the cold roofing materials creates condensation, which drips onto the attic insulation causing it to lose its effectiveness. Warm attics in winter also contribute to ice damming as the snow melts on the roof and re-freezes at the eaves, causing water to accumulate.
Installing a Solar Powered Attic Fan will allow for better air flow and moisture control inside your attic and prevent the condensation which can lead to mold and mildew problems.
Approved by Florida Building Codes and Texas Department of Insurance to withstand severe weather*.
* with solar panel remote mounted
- Reduce mold growth which can damage roofing materials and spread to internal walls
- Reduce structural damage caused by ice dams
- Keep insulation effective by keeping it dry
- Reduce possible wood rot
- Reduce musty odors
A cost-effective, easy to implement solution for maximum results
Specifically tailored for the do-it-yourselfer and standard installations can typically be completed in a single afternoon. If you choose not to install the product yourself, U.S. Sunlight has a nationwide network of certified installers who can help. For details, or to find an installer near you, visit our contractor locator.
- Easy to Install
- A simple upgrade to existing static vents to quickly utilize active, solar powered ventilation
- Eligible for 30% federal tax credit
- National network of preferred contractors available
Industry leader of solar attic fans with premium quality & innovative design
- Engineered to be the most efficient solar attic fan line on the market
- Only solar attic fans compatible with the Solar Controller for a hybrid power option and electronic thermostat and humidistat
- 20 year warranty included on the ABS dent, fade, and rust resistant shroud and hail-resistant solar panel.
- Commercial grade construction withstands hurricanes and tornadoes – complies with Florida Building Codes and approved by the Texas Department of Insurance
MATERIALS OF CONSTRUCTION
Vacuformed Qi-Mei 747S ABS with Ultraviolet Light inhibitors, 0.5mm thickness Resists fading, denting, rusting, and cracking
20 gauge steel
1/4" stainless steel mesh screen secured with galvanized self-taping screws
12" 3-wing ultra quiet aluminum blades with pitch angle matched to dc motor/solar panel
Metal components are steel finished with zinc alloy G-90 thickness, hot dipped. Painted metal components are powder coated : pure polyester coating 3 - 5 mils thickness
12 Watt panel with high transmission tempered glass encapsulating 35 poly-crystalline solar cells. Manufactured to ISO 9001 standards
38 volt DC motor with external brushes
16 gauge black and red copper wire
23" x 24" x 10", 16 lbs
12-Watt Roof-Mount Solar Attic Fan
- Up to 945 CFM under direct sunlight for attics up to 1,350 square feet
- Fade, rust, and dent resistant heavy-duty plastic dome
- Solar panel is wind, hail, and impact resistant
- Solar panel tilts and rotates for maxiumum sun exposure and energy collectio
- Optional Curb-Mounting Adapter available for flat roofs
- 5-year Limited Warranty
- Requires 454 square inches of intake vents
Learn about warranty coverage, transferability, limitations, other conditions and customer responsibilities.
Read the full warranty and the list of eligible products.
For Warranty information and questions, please contact us at: firstname.lastname@example.org
The Air Vent Product that you have purchased has a limited warranty from the date of purchase against defects in workmanship and materials. The length of the warranty varies by product. Please see attached chart for details. Any part believed to be defective must be returned to the factory (Air vent, Inc., 4117 Pinnacle Point Dr, Suite 400, Dallas, Texas 75211) freight prepaid. If found to be defective following examinations, any defective part will be replaced free of charge and returned freight prepaid. This warranty does not cover any labor costs, including those required for field repair or replacement or removal of any allegedly defective part.
Air Vent shall not be liable for, and this warranty does not apply to, any failure, defect or damage resulting from or connected with misuse, abuse, neglect or improper handling or staging , or installation not in strict adherence to Air Vent’s written instructions; impact of foreign objects, fire, flood, earthquake, lightning, hurricane, hail, tornado or other violent storms or other act of God; or defects in failure of or damage caused by materials used as roofing base over which the product is installed or by movement, distortion, cracking or settling of walls or the foundation of the building.
Air Vent reserves the right to discontinue or modify any of its products including color, and shall not be liable as a result of such discontinuation or modification, nor shall Air Vent be liable in the event replacement material may vary in color in comparison to the original product as a result of normal weathering. If Air Vent replaces any product under this warranty, it may substitute products designated by Air Vent to be of comparable quality or price range in the event the product initially installed has been discontinued or modified.
Replacement Plus™ Protection
Products are covered by Replacement Plus™ protection (see attached for applicable products) for a period of time (varies by product) provided that the product has been installed in strict accordance with Air Vent’s written installation instructions. Under this warranty feature, Air Vent, at no charge, will replace any product found to be defective during the Replacement Plus™ period (Replacement Plus™ period begins when the product installation is completed). Air Vent’s maximum liability under Replacement Plus will be equal to the reasonable cost to replace the defective product, including labor.
In instances in which Air Vent, according to the terms of this warranty, has agreed to pay the cost of labor required to replace a defective intake vent, Air Vent will provide reimbursement only upon receipt of a copy of the contractor’s invoice or other written evidence of the completion of the work which Air Vent, at its sole discretion, deems acceptable.
Provided that the products covered by this warranty have been installed in strict accordance with the Air Vent Inc. written installation instructions and in accordance with all local codes and standards, including those pertaining to fire-rated construction, Air Vent warrants to the original purchaser or first subsequent owner of the property that the product is free from manufacturing defects for the described length below from the date of purchase. If there is a change in ownership, the warranty may be transferred by the original purchaser of the product to the new owner (first subsequent owner) under the terms and conditions of this warranty.
The electrical motor is to be used solely as a direct replacement for a motor of the same model in an Air Vent, Inc, power attic ventilator. Using the motor in any other product could result in electrical shock and/or fire, which may cause property damage, serious injury or even death. Any motor replacement should be installed by a qualified licensed electrician in accordance with local, state and national electrical codes and standards. Make sure that power to the unit has been completely turned OFF at the breaker before approaching or inspecting the power attic ventilator or installing the replacement motor.
This warranty is expressly in lieu of all other oral or written warranties, liabilities or obligations of Air Vent. Pertinent state law shall control for what period of time subsequent to sale a consumer/homeowner may seek a remedy pursuant to the implied warranty of merchantability or fitness for a particular purpose. In no event shall Air Vent be liable for consequential or incidental damages of any kind, including any damage to the building, its contents or any persons therein, resulting from the breach of any warranty set forth herein, unless exclusion of these types of damages are specifically prohibited by state law. No field representative of Air Vent or any distributor or dealer is authorized to make any change or modifications to this warranty. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
The following warranty is effective 6/23/2017.
|Product||Warranty||Replacement Plus Protection|
|ShingleVent ®II ridge vent (12", 9", 7", Class A 9" and 7")||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|Peak Performer™ I & II Rolled ridge vent||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|Multi-Pitch FilterVent® ridge vent||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|The Edge™ Vent||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|Hip Ridge® Vent||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|VenturiVent™ Plus ridge vent||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|VenturiVent™ Rolled ridge vent||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|ATTIC-AIRE™ ALL SEASONS™ Filtered Ridge Vent and Roll Vent||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|Power Cool Plus™ Power Attic Ventilator- model PC15||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|Power Cool Plus™ Power Attic Ventilator- model PC12||10 Year Limited Warranty||5 year Replacement Plus™ protection|
|Power Cool™ Power Attic Ventilator- model BR28||10 Year Limited Warranty||5 year Replacement Plus™ protection|
|Power Cool™ Power Attic Ventilator- model BR26||5 Year Limited||2 year Replacement Plus™ protection|
|Solar Power Fan- (models NPSP8WW, SC8BL, NPSG8)||5 Year Limited Warranty||2 year Replacement Plus™ protection|
|Gable-Mount Power Fans (APG, APGH)- with Humidistat||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|Gable-Mount Power Fans (WCGB)- with Thermostat||10 Year Limited Warranty||5 year Replacement Plus™ protection|
|Gable-Mount Power Fans (model WCGA)||5 Year Limited Warranty||2 year Replacement Plus™ protection|
|Gable-Mount Power Fan Solar (NPSG8)||5 Year Limited Warranty||2 year Replacement Plus™ protection|
|Gable-Mount 20 Watt Solar Fan (1020APV)||5 Year Limited Warranty on Fan Motors||20 Year Limited on Solar Panel, Fan Housings|
|Whole-House Fans||10 Year Limited Warranty||5 year Replacement Plus™ protection|
|Roof Mount Power Vent (ASRHP, SV3000)||Limited Lifetime Warranty||5 year Replacement Plus™ protection|
|Roof Mount Power Vent (RV26, RV28)||10 Year Limited Warranty||5 year Replacement Plus™ protection|
|Roof Mount Power Vent (NPSP8WW, SC8BL)||5 Year Limited Warranty||2 year Replacement Plus™ protection|
|Automatic Foundation Vent||5 Year Limited Warranty|
|Heavy Duty Automatic Foundation Vent||5 Year Limited Warranty|
|Powered Foundation Vent||5 Year Limited Warranty|
|Ridge Vent 20’||Limited Lifetime Warranty|
|Airhawk® Wind Turbines (TIB, TOB series)||Limited Lifetime Warranty|
|Attic Aire™ Wind Turbines (WT series)||5 Year Limited Warranty|
|Airhawk® Static Vents (RVG55, B144)||5 Year Limited Warranty|
|Low Voltage Foundation Vent (Series 5 & 6, Radon)||5 Year Limited Warranty|
|Solar Power Fan (AV9912TR, AV9920TR, AV9930TR)||5 Year Limited Warranty on Fan Motors||20 Year Limited on Solar Panel, Fan Housings|
|Skylight Tubes (1914ST, 2114ST)||10 Year Limited Warranty|
|US Sunlight Solar Controller (SC20)||1 Year Limited Warranty on Unit, Remote|
IRS Solar Energy Tax Credit
Our solar-powered attic ventilation products may qualify for a Federal Tax Credit. Refer to the “Residential Energy Efficient Property Credit (Part I)” and the “Nonbusiness Energy Property Credit (Part II)” of IRS Form 5695. Although attic ventilation products are not specifically listed they may qualify for a credit.
Products that are eligible: